D14011-PPI-02 – DSK140H460
Minetuff Series 140HP High Head Pump Skid, 460V, 3PH, 4" Flanged Discharge, 100ft power cord. Pump comes standard with TC-TC mechanical seals, zinc anodes and Class H insulation.
| Item: | D14011-PPI-02 |
| Model: | DSK140H460 |
Ratings |
|
| HP | 140 hp |
| Frequency | 60 Hz |
| Phases | Three-Phase |
| Amps - Full Load | 146 A |
| Voltage | 460 VAC |
| Pump Power Cord Type | G-GC |
| Pump Power Cord Gauge | 1/0-3 |
| Cable Length | 100 ft |
| Motor Type | Submersible |
| Continuous Duty | Yes |
| Motor Insulation Classification | H |
| Poles | 2 |
Operation |
|
| Max. Flow Rate - 60 Hz | 920 gpm |
| Max. Head - 60 Hz | 785 ft |
| Min. Head - 60 Hz | 260 ft |
| Shut Off Height - 60 Hz | 785 ft |
| Stages | 2 |
| Max. Solid Handling Size | 10 mm |
| Motor Cooling | Fully Submerged |
| Max. Operating Temperature | 40 °C |
| Winding Resistance (Main Winding) | 0.042 |
| Maximum Starts in a 1 Hour Period | 15 |
| Max. Immersion Depth | 75 m |
Materials of Construction |
|
| Pump Body Material | Cast Iron |
| Impeller Type | Enclosed |
| Impeller Material | Stainless Steel |
| Intake Screen Material | Stainless Steel AISI 316 |
| Fasteners Material | Stainless Steel |
| Seal Material | Tungsten Carbide / Tungsten Carbide / FKM |
| Seal Type | Mechanical Seal |
| Diffuser Material | Cast Iron - Polyurethane |
| O-ring Material | NBR + HNBR |
| Pump Shaft Material | Stainless Steel |
| Stator/ Motor Shell Material | Cast Iron GG-20 |
Dimensions |
|
| Discharge Type | Flange |
| Discharge | 4 " |
| Impeller Dia. | 254 mm |
| Suction Type | Screened |
| Product Length | 52.4 " |
| Product Height | 36.2 " |
| Carton Length | 1330 mm |
| Carton Width | 1005 mm |
| Carton Height | 920 mm |
Other |
|
| Electrical Agency Approvals | cCSAus |
| Warranty Standard Time | 18 Month Purchase |
| Repair Kit Available | Yes |
